MP3DP CoreXY serial number log V3-V4

Claim your Build’s serial number here!
Instructions at the end of this post.

This printer first printed 2021-08-27 -
This is the V1 Engineering MP3DP “Repeat”
Serial - 000001

Took it’s “finished” form on 2021-09-18

Instructions for Serial numbers.

This is the V1 Engineering “Repeat” Serial - 000001 (the placeholders are extremely wishful thinking).

When you think your build is done enough to print. Take a picture, add it here (preferably with a little info), claim your number and display it. If you are unsure what your number is, it should be one higher than the post above yours.

You can post and claim as many numbers as you have builds.
No purchase necessary
No other posts in this thread.

11 Likes


MP3DP “Repeat” serial number 000002

310mmx310mmx275mm build volume, 1/2" plywood frame with MDF marquee. Shown here before final cosmetic completion. Still needs the bottom endstop wires extended and tucked away, LED lighting completed.

First print 10/16/2021

8 Likes

2 posts were split to a new topic: New Printer?

MP3DP “Repeat” Serial Number 000003
300x310x330 build volume, Vulcano Hotend, 1/2" Plywood construction.
Build start - November 01
First Print - November 16
Build finished - December 7.



Building Thread

6 Likes

Looks Like I forgot to post this one so,

MP3DP “Repeat” Serial Number 000004

11/20/21

MP3DP “Repeat” Serial Number 000005


Uploading: PXL_20220225_003841891.jpg…

First print 2/25/22

3 Likes

Is that bamboo?

No, vaneered ply. Some of the leftovers from the first LR2 build.

I guess this idea petered out? Or serial number 000006. :joy:

4 Likes

000007…triple ought double O seven? I’ll take it.

300x300x535, orbiter 2.0 + mosquito, 24V.

Edit for the addition


I have to find just ONE more tnut…

4 Likes

I’ll jump in.

Serial number 000008

300x300x350 print size.

Skr pro
Octoprint
Hemera
750w heated bed
300w heated chamber

4 Likes

Does it just have to print or be fully completed?

I went with ‘mostly complete’.

My projects are never really ‘fully complete’.

2 Likes

If it can squirt molten plastic, it is ready for a number!

3 Likes

Well does that make mine 00000009? or however many zeros we are at LOL

300x300x400
750w ac headed bed
Custom cut build plate and support on the LR3 from 1/4" aluminum
Hemera
SKR Pro

4 Likes

I am hoping this makes me a 000 010!

(Or a 2 in binary…)

300x300x285
BIQU H2VS Revo
CAN BUS on Manta M8P and EBB36
500W AC heated bed 1/4" aluminum plate
Added space below for electronics.
Custom extrusion build plate support

5 Likes

Ok, completely forgot to add my 2nd printer to the serial number log…
Well I guess this one will be 0000011
First started some day in 02/23
First print: many moons ago
305x310x285 build volume
Biqu H2 1st generation
Manta M8P V1.0, U2C V 1.1 and EBB42
Sidewinder Fula-bed
Custom X-Carrier and dual 5015 Fan


Video of it printing

The Matrix has been built!!!
download-1

2 Likes

Well I just realized these are all v4’s in the Repeat (V3) log…you all want lower numbers or just keep going as is?

1 Like

Since the v1 and v2 MP3DP didn’t get serial numbers… just keep going…

1 Like

You mean a number lower than 8?

Nah. I’m good. Just keep going.

2 Likes

So I’m new to this. Is there an official sticker or Logo plate to carve into the panels? LOL

1 Like