Wondering if anyone has made the latest TFT35 cnc focused firmware. Currently running the latest v1 published firmware but it seems to be 3D printer focused.

I haven’t used my Primo in a couple years, and I just updated the display to BIGTREE_TFT35_v3.0_E3.27.x.bin from the CNC.TFT.Package.zip. None of the CNC functions are there anymore, and it looks like just a 3D Printer display now. Did I grab the wrong firmware?

Nevermind. I am a dummy. I forgot how to get into Marlin mode…

Hey guys, so I have used the cnc-tft firmware. Located here. https://github.com/V1EngineeringInc/BIGTREETECH-TouchScreenFirmware/releases/download/3-22-23/CNC_TFT.zip But I get the 3D printing menus as pictured? [IMG_1151] Am I doing something wrong?

[image] Frank: Am I doing something wrong? No, changing the firmware’s icons is too much work and would need to be done after every update.

So this is something Bigtreetech would have to push through? Maybe we should push Bigtreetech for this?

[image] Frank: Am I doing something wrong? Just ignore the top 4. [image] Frank: So this is something Bigtreetech would have to push through? Maybe we should push Bigtreetech for this? That is a tall order but if you know what you are doing get a switch for extruders=0 and ditch the …

You said to ignore the top 4, but the movement and em stop are used? It’s more the heat/fan and unload that are useless. Is there a way I could change the “heat/fan” to maybe a home button, and the unload to maybe something else? Where would I edit them?

Should we start a petition to try and get Bigtreetech to push cnc firmware? Maybe it might get Bigtreetech’s attention as there is a demand for it? Maybe with your contacts at btt you could push this through as well and show them that there is a demand for this?

[image] Frank: You said to ignore the top 4, but the movement and em stop are used? It’s more the heat/fan and unload that are useless. Exactly. [image] Frank: Is there a way I could change the “heat/fan” to maybe a home button, and the unload to maybe something else? Yes, but the TFT…

But… Becuase I did not like that sort of thing we made our own. [image] Jackpot CNC Controller Oh buddy! Includes; 1 - Jackpot CNC Controller board 1 - ESP32 (Internal Antenna), MicroUSB. 5 - TMC 2209 Drivers, with 5 heat sinks. Does not include, a USB cable More detail, https://do…

V1E.com Forum

TFT35 firmware for cnc?

Software / Firmware SKR Boards

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled