Hello, I am looking to build a Lowrider 3, and have printed most of the parts. I wondered if there are any publicly known details on the Lowrider 4. I am trying to decide if it’s better to pull the trigger on the hardware kit now and finish the build before I go back to school or sit on it.

TL; DR: Low Rider 4 is out and it’s great. I’m closing this post. If you have a question about the new Low Rider, I suggest making a new post (the circle with a + in it in the bottom right of the forum). I suggest choosing Advice category or the Hardware Development category. If you need this reope…

THATS what the arrow one means… :exploding_head: :grinning:. I understood Red-Stop, Green-Go, Blue-Probe, White - “Go over there?” Guess it is, at least to some extent.

[image] Enrico: It’s easier than You think. I added a 4 Input I/O Module on the spare port of the jackpot, and modified the Config file to let it work and assigned a function to every input It would be so great if you either made a tutorial showing exactly how that was done, or a video explai…

I will! But first I want to finish the V4 Build, take pictures, compile and test the config file, and than share all together in a clear and complete way

First you have to answer for your sin of not sharing that stuff earlier. :sweat_smile: I’d really like to know how many cool ideas this forum doesn’t know of… :slightly_smiling_face:

I imagine there’s lots of cool customisations out there. I’m very new to this, but loving it already.

[image] Ryan: Not sure if I should make a bigger hole, or just make a not they don’t fit. Here are the photo, as I promise [IMG_1642] [IMG_1643] [IMG_1640] [IMG_1644] [IMG_1641]

I’ve done only for Y axis motor, if you want I can do similar for Z as well, to be clear for you.

By the way, separate from the question of the physical fit, your motors are wired differently from the usual motors that we use. [image] [image] Normally, two pairs of adjacent wires on the 4-pin connector are connected to coils, but as listed from the store, the ordering on yours is different, w…