Status on Lowrider 4

[DougJoseph (Doug Joseph (design8studio))]

@Justus

Is there a fusion360 post process for the jackpot controller?

The Jackpot’s firmware is FluidNC, which is GRBL compatible, so you’d be looking for a post processor compatible with GRBL in general, and hopefully FluidNC in particular.

This one says it supports “GRBL 1.1”:

Fusion 360 Post Processor (v2.1) is Available

Release V2.1 of the Flyfisher604 F360 post processor is available. Release History ----- Github tag: v2.1 ----- Enhancement: Custom gcode for coolant channels can be defined ----- Github tag: v2.0.1 ----- Bugfix: Undefined variable used for Z height during toolchange, garbage output ----- Github tag: v2 ----- Numerous bugfixes Coolant channels reworked; allows for channels A and B to be enabled at the same time; allows a coolant type to be defined for a laser; coolant properties are un…