Not just that, Mainsail and Fluidd are made for Klipper, much better performance.
I do have my CR10S-Pro running Klipper with MainSail, the original Repeat was also controlled with MainSail, but that will change as soon as I finish converting it to the V4.1
I’ve heard this in several places, but it isn’t true. I have ran it on pis for a very long time (way before the 3b+) and I haven’t ever thought it was resource intensive. I run a lot of plugins and the pi still runs great. I didn’t like running it on a pi zero w, but it still worked. And this is on my v1pi image, which also runs cncjs.
I don’t want to start an argument. But I also don’t like to see people complain about octoprint performance. It is a much more mature project with a lot of excellent features (like plugins and an easy install).
Hey @probrwr, able to share any pic(s) of your stranded flexible Cat cable based CAN bus setup?
Only saw 2 CAN bus wires (data via the white and blue?) connected in your earlier pic, guessing you’re sourcing power for the 2 split across two pairs elsewhere, or after this pic was taken?
Congrats on the win Mike! Billy Boy’s Scotch Ale sounds like fun, as does the World Beer Cup event. Nice!
Couldn’t find Billy Boy’s on https://parkwaybrewing.com website. Look forward to visiting the tasting room, and/or picking up some brews from Parkway Brewing Company if/when visiting Salem, VA 24153.
One of my favorite local brews is “Splinters”, a barrel aged scotch ale by Black Raven, delicious but dangerous at 10.8%…
The same thing is done at most BBQ competitions. The competitors will crank up the big smoker to cook all the meat that’s required for feeding people, then they’ll run a smaller smoker with just the competition meat in it.
Hey @probrwr, able to share Klipper printer.cfg that’s working for your Manta M8P build? Am currently cobbling printer.cfg for my Octopus v1.1 based build, so pins will differ. Getting close, but guessing some of my settings are wrong/missing. Cheers!
@gpagnozzi thanks for sharing your Manta M8P based config earlier, was very helpful.
When I built my machine I used a 5 pack of motors. It seemed to work okay even though they were a little small. They were Stepperonline Motors and I have not had any issues before. My rationale was that with 3 Z motors I did not need the extra torque and CoreXY shouldn’t need as much either.
Lately I have been having issues with the XY motors skipping and I adjusted the current up. I think this actually caused the motors to fail and I broke down and bought larger motors over the weekend. I installed last night and they a quieter and work perfectly.