Jackpot CNC Control Board official release

[Michael_Melancon (Mike M)]

@jono035

What’s the specific issue here? Have you done anything to conclusively show that this is the issue? Is this something you’ve tested or just a hunch?

In case you missed it, these threads are I believe the start of the path that led to here

FluidNC not connecting automatically to network

Hi all, I have been trying to get my Jackpot working and I’ve run into a weird problem. If I use the USB connection to start FluidTerm, everything works. However, it isn’t connecting to the network automatically. Originally I was just using AP mode, and before I started FluidTerm it would not broadcast the SSID. Once I started FluidTerm, the SSID would come up. I’ve check, and it’s retaining my settings. I just can’t seem to understand why it’s not trying to start in wifi mode. I guess I’…

and then

ESP32 Tests

Yellow is the boot pin Blue is the power pin Purple is the 24v PS Clone MicroUSB [clone] Clone USBC (it never gets high enough on the boot pin to boot) [usbC] Genuine - hmmmmmm that is interesting [genuine] Genuine 10ms instead of 1ms [genuine10ms] Mike mentioned a boot delay…looks like that is built in?? That is a 30ms delay? If we add another 30ms so all the boards get it will that just make the genuine take 60ms? Adding a resistor and a cap seems like it is worth the $0.08 it m…