Also, the tooltips are not popping up anymore when you hover
Fusion 2.0.21487 x86_64 still not working
Itās what was said above, he does not have a timeline when thereāll be a fix. You might as well use EstlCAM for the time being. 
I went through and fixed all of the parameters back to where I had them before the update, and itāll allow you to āpostā but then a blank gcode program is created.
I spent some time today looking and Fusion changed how they define parameters. Looks like they updated their documentation in early 2024. I see no reference to the old method being deprecated - matter of fact they are still somewhat supporting it or none of the titles for the parameters would appear. Iām guessing their PP improvements didnāt test backwards compatibility very well.
I understand some of what needs to change, but I need to read more and review the code in some of their PPs to see exactly how it works now. Was hoping for a quick fix, but it isnāt.
Still no timeline to resolve. I would suggest opening support cases with them and see if they can fix their now 1/2 working interface. The hope is this broke some other PPs to.
3 Likes
Following.
Just submitted a case on this.
Went to fire up Fusion to make a part today and am getting blank gcode like @Chinstrap777.
1 Like
My recommendation for the moment is to use the native GRBL PP in F360 and then review the gcode before running it.
1 Like
Took a look at this and my MPCNC is set up on Marlin. Any tips for making that conversion? The gcode looks pretty different?
Fusion 360 Post Processor MPCNC v3.0 (Beta 1) is Available see this post for more details.
4 Likes