Always wanted a Router and this seems like a great bang for the buck Option. First post here, waiting on the slow buffalo from china at this point. Mostly printed in PETG-GF. Still need to print a few more braces but I haven’t ventured out for conduit yet and want to make sure of the sizing. My …

[image] LowriderBuildTH: For the smaller collet - I ended up buying one for my Makita router from Germany Huh, interesting. I didn’t ship anything to Thailand. Can you get them somewhere else as well? :sweat_smile:

I forget the place now, it might have been a different country, but it was somewhere outside Asia recommended here.

been a busy with life last couple of days. Have ordered in some fasteners but need to find a way to haul some sheets and steel home to get on with flattening my table and building a cabinet. After looking around a bit I’ve decided the most cost effective solution is a grid of m6 T-nuts thru the bo…

I’m quickly running out of my daily allotment of free time as issued by the one whom must me obeyed… did manage to get some steel framework on the bottom of my table. Big improvement but not quite perfect. 25x50x1.4 mm tubing, 6m stick only managed 3 crossmembers. [IMG_20261015_204229] I manag…

where were we??? been a couple days. Have had a few more issues with raspberry PI dropping from the network and the limit switch I bent back straight broke. Learning about CAM stuff in Fusion. No rapids or tool changes in the hobbyist version sucks! was avoiding screwing into my table b4 my hold…

Fist project…After some 1mm end mill clean out…Finished: [IMG_20261019_113347] After furst cut with 3mm upcut endmill [IMG_20261019_093238] After clean up with 3mm ball end bur. [IMG_20261019_093232] Lots to learn and remember. Not super happy with the result, the clean out paths could hav…

this makes me very happy!!! Been reading that klipper isn’t so great for CNC for many reasons. I started trying to configure a single phone screen UI for the LR4 and am quite pleased with the progress. Still early days but have tested interactively and all seems well. Intent is a single phone sc…

No bad days when new toys arrive! [IMG_20261022_151557] I think Mainsail CNC Pendant is now up on Github… I think it’s a big improvement, but I’m biased!! [image] Mainsail CNC Pendant for Klipper Software / Firmware I have some CNC background from 20 years …

Klipper with a couple macros works great for cnc, but it does not work on esp32 so isnt common with most everyone running the jackpot board. If you are using old 3d printer hardware, it is really easy to set up. In the US there are many ender 3 printers available used for free to $40 so with 2 if …

This, like many projects, spiraled out of control. I wanted a single klipper screen solution that avoids accidental keypresses due to having to scroll. Once we started adding secondary pop up menus the amount of detail expanded quickly. Now only the e-stop is the only real thing you can screw up …

Farm Fresh from the LOS... another Thai build

LowRider CNC Your Builds

ThaiGer (Dung Adumbs) October 22, 2026, 9:41am 18

No bad days when new toys arrive!

I think Mainsail CNC Pendant is now up on Github… I think it’s a big improvement, but I’m biased!!