[V1 currently working]

Lots of small details and adjustments later… [image] The lowrider served well, as always… Quickly made some templates [image] [image] Still looking for ideas for the cabinet doors :slight_smile:

The base for an automatic cat feeder. Made using a cereal dispenser, a servo and (of course) a tiny esp32 running esphome. Serveral hours to 3D print, 15 minutes to cut and stack. [IMG_8184] [IMG_8183]

One of those cases where the CNC shines [IMG20251101031316] [IMG20251101161011] [IMG20251101161042] [IMG20251101162908]

[image] Terry O'Sullivan: there is 12 coats of 2k high build timber sealer . applied 3 coats at a time than sanded and than finished with 6 coats 2 k clear, ended up having to buff clear due to couple bits of dust , normally don’t polish clear as it highlights grains etc better unpolished Do …

[image] Mike: [image] Fabien: By the way, I’m looking for ideas for the cabinet doors, if anyone has some CNC design idea or samples, just let me know I have these really cool ikea cabinet doors that have a 3D wave texture on them, something like that would really pop against all the stra…

[image] Mike: Do you (or anyone else) have a good resource for learning about the different sealers and application techniques? I know nothing about sealers and stains etc but I feel like I should lol. This book may be geoblocked - but it is probably exactly what you are looking for. https:/…

Hmm, I usually polish my wood by hand and then wipe it off with a paper towel when done. :slight_smile:

It might be hard for some of you to remember, but October was “clean up the shed” month at my place, and when last I posted I think I’d finally moved the wood vice from the compressor bench, and that meant moving a heap of timber that I had stored to trim off my workshop drawers. I seem to have be…

Wow, that‘s more than I can do in a year… Love the pyramids, maybe one could print just the tip in TPU? :smiley: Also, a drum sander is still on my wishlist. :scream:

What are you working on currently?

Random or Off Topic

Fabien (Fabien) November 4, 2025, 2:21pm 147

I made something similar for a little gift box
I made an howto a while ago, no pyhton involved, just some blac and white pictures with gradients

I’ve seen these doors, they looked like a cool cnc project, but my wife just don’t like them ^^"

I’m thinking maybe something like this ones

Or white mdf backpanel with some oak tassles to match: