Query L3 cables & connections

[jobit (Jens Backman)]

Regard’s a picture at the “Low Rider CNC 3” instructions site on the X gantry and the core assembly. Wondering about the connection sticking out at the bottom as highlighted at the attched picture.

Also an approximate lenght of the endstop microswitch cable from the core to the board with a gantry width of 1400mm.

[gpagnozzi (GP)]

That connector is for the touch plate.
As far as the end stop wire, you will need to measure your own, but a good start point will be around 2000 mm and cut it as needed

[azab2c]

@jobit

Also an approximate lenght of the endstop microswitch cable from the core to the board with a gantry width of 1400mm.

Shared some wiring length info at Purple-black-rainbow LR3 🤷‍♂️ , build video @ https://youtu.be/FJ7nYio8oOE - #19 by azab2c hope that helps!