OK, I just got a new TFT35 E3 3.0 in to replace my old one that had a couple of extraneous lines on the display. Connected it and flashed the current firmware and I’m seeing everything reversed and upside down… [IMG_20211216_142443413] Any idea what’s going on? I’ve double checked the wiring and …

Got it… John had cut one of the wires in the wrong place, so he spliced them back together, soldered and wrapped with tape. When I removed the tape the solder joint was still good, but the copper on one side had broken inside the insulation. I redid the splice and heatshrinked over the splice and it…

OK, got a weird one. TFT35 screen backwards

Mostly Printed CNC - MPCNC Advice

kcny (kcny) December 16, 2021, 10:51pm 2

See here:

1 Like