9 Likes
Mighty mini!!
1 Like
Down to the wire, finished this last night.
Also trimmed edges so they are straight and added oil.
See you Saturday!
6 Likes
whoa!
1 Like
Hey, how is that programmed, I see it only cuts one way, which probably makes a cleaner cut, that is not estlcam is it?
1 Like
Looks like @jamiek’s Surfacing gcode generating web script to me…
Can try out at https://vector76.github.io/gcode_tpgen/index.html
And/or read/edit his code at https://github.com/vector76/gcode_tpgen/blob/master/index.html
5 Likes
Exactly. Even if single-direction is not needed, I find it much quicker to set up, and it does perimeter first, climb milling, to prevent tear-out.
4 Likes
Look forward to meeting you at the show! And anyone else who shows up!
2 Likes
Okay, I’m here, I ate, and I am tired.
Just found out they decided to open the doors from 6-9 today. If I get in there tomorrow and all the tables are gone again I will not be happy.
Already thinking about breakfast and coffee. If anyone has any suggestions let me know I will check in in again before I fall asleep.
6 Likes
Rise n roll bakery. Yum
3 Likes
I wish I could be there. Have fun and post lots of pictures!
2 Likes
Okay MRRF is open at least 2 hours early…assigned tables this time.
The show isnin the far back corner of the fairgrounds to the right. Not in the front buildings. No signs out front yet, 409 hollyhock building A.
You can drive in to unload.
3 Likes
Oh and our tables are in the corner… closest to the gate if that makes any sense.
2 Likes
In town now. Be there shortly!
1 Like
Just checked into the hotel, I’ll come over in a few minutes.
1 Like
Sure that isn’t a pool-side view? As in a side of the pool?
Guessing most people see a wall, some see a canvas, I see Ad space/opportunity 
Got access to a LR3, some paper, tape and multi sharpie setup to fix that view?
6 Likes
