Interesting, will override my Outer Wall, Top Surface and Initial acc from 1800 to 3500 for this print.
Am using 500mm/s instead of 1000mm/s shown in screenshot of your settings.
Need to improve my settings (flow, temp, retraction, cooling?), my fan duct design needs improving too.
Am not seeing similar indent ripple artifacts related to belt/pulley/idler/bent-shaft. My belt tension is looser than I initially thought is needed. Counter intuitively, I loosened my belts after seeing Ryan’s belt tension at Open Sauce.
Camera lighting and distance make a big difference… This is without doing recent temp/retraction towers. Goal was just to see belt ripples, which are minor for my relatively untuned build.
40c on the XY Steppers’ Temp stickers