Hello! I have a table top already that I want to add super struts to a use for a 4’x8’ LR4 table. The table is 4’x9’ right now and I need to add around 12” of width so that it’s 5’x9’. See pics. Is this possible? How would you do this? Also should the top face of the superstrut be on the same plane …

Welcome @Binky1135 ! Have you already figured out how you want to route your shop vac and wiring? I see a shop vac under the bench, guessing you’re looking to use that? Am asking because I’ve seen some people ( @bitingmidge I think) augment an existing bench on just one side to extend out in a way…

Hi, I haven’t seen that table @vicious1 ’s table. Can either of you link it? I’m definitely interested in that option. That this point though, I am interested in any viable option, as I am a 1/10 woodworker.

Here you go. Tons of pics and the CAD link… [image] ~ $200 Full sized Lowrider table, Non-CNC Build Hardware Development [PXL_20250205_233205080] I went out to see exactly how I would make a table for a 4’x8’ Capable CNC if I did not already have a CNC. Besi…

Thanks! I have seen this great torsion box. I ment this bitingmidge’s table extension but accidentally tagged vicious lol.

[image] Brandon Garza: I ment this bitingmidge’s table extension I think he meant this: [image] LR2-LR3 The Longest Conversion (AUS) [23-10- 14 at 13-58-21] 23-10- 14 at 13-58-211920×1080 241 KB

Yep, that’s the one, cheers Mike! Also… @PKochZ71 managed to route 1-1/2" Vac hose inside the Y rail, helping to minimize overall table width (i.e. total footprint)… [image] LR3 to LR4 Upgrade! (Alabama, 2024) [IMG_5343] So… For people extending width of an existing bench, and wanting to e…

I have a superstrut table, and while I love the metal running surfaces, I don’t know that I’d build a new superstrut table at this juncture. There would be other simpler ways to achieve metal running surfaces without the superstrut, and practically I’m not sure how much the surface really means on t…

Yea I am pretty much fixating on the superstruts because I am wanting the metal running surface. I saw someone post their torsion box table and the top surface was beginning to wear a groove! I do not want that. I may just do a simple extension with angle iron or wood wings or something, then figure…

Thank you for sharing and helping!

LR4 Table with Superstruts

LowRider CNC Advice

Jonathjon (Jonathan Jones) August 28, 2025, 1:22am 4

Here you go. Tons of pics and the CAD link…