LR3 Bundle Out of Stock

[TheFrisco (Robert)]

Any idea when or if bundles will be in stock again?

Thanks Robert

[Tokoloshe (Philipp)]

They probably won’t, because the LR4 is going to be released in a few days/weeks.

[waimea]

I am also interested in a LR3 bundle and I want to build the LR3 before the LR4.

[waimea]

@vicious1 Is this possible?

[alumunum (Echo Sierra)]

There is more info here, at least about the status of lowrider 4

Status on Lowrider 4

Hello, I am looking to build a Lowrider 3, and have printed most of the parts. I wondered if there are any publicly known details on the Lowrider 4. I am trying to decide if it’s better to pull the trigger on the hardware kit now and finish the build before I go back to school or sit on it.

The consensus amongst some is that the printed parts are perfectly fine. You can print everything and then make the parts yourself as the first step.

[vicious1 (Ryan)]

I pulled the parts kits as I am out of YZ and XZ plates. I have been getting emails that are assuming the LR3 kits will directly work as the LR4 and that is not true. I currently do not actually have accurate hardware counts, but it is different counts, very similar hardware, looks like new lead screws.

[TheFrisco (Robert)]

Makes sense when a new version is around the corner to not restock old parts.

Will there be a LR4 bundle kit?

And just to organize myself for my build I have going on, are we talking weeks or months before the LR4 bundle kit is available?

Thanks Robert

[vicious1 (Ryan)]

@TheFrisco

Will there be a LR4 bundle kit?

Absolutely.

@TheFrisco

And just to organize myself for my build I have going on, are we talking weeks or months before the LR4 bundle kit is available?

Hard to say. I thought we were done 3 times now. The 4th try is soon to be released to the beta team so hopefully we are talking weeks.

[TheFrisco (Robert)]

Well once released, I’ll be the first in line cutting airplane panels and brackets

[Nathan_Doty]

To be fair. Most of the folks here can cut the plates for you.

[Jonathjon (Jonathan Jones)]

Ryan will have the plates for sale with the kits just like the LR3. And for the price he gets them for its just about cheaper than you can cut them at home, if you live in the US and shipping is reasonable that is.

[Nathan_Doty]

I’m taking about the 3 plates, for the people that want to build a 3 before a 4. I dontb think he plans on making any more 3s.

[Jonathjon (Jonathan Jones)]

Ahh ok yes. I just cut a set for someone a few days ago. My apologies. I thought you were meaning the LR4 XZ Plates

[Dreyfus]

Maybe we could set up a pay cut it forward thread

[ebbels (Eetu)]

@TheFrisco

Well once released, I’ll be the first in line cutting airplane panels and brackets

Have you seen this?

My second lowrider

Might have to make it a bit bigger. This was purpose built to handle 4x12 sheets of aluminum for the airplane I am building.(Zenith Ch 750).

[geoffjones]

Wanting to convert my Primo to a LR3. If Im reading correctly, Im SOL…no parts available. Any suggestions? TIA

[Tokoloshe (Philipp)]

Wait until the LR4.

[Nathan_Doty]

You don’t have to buy plates from ryan… you can make them.

[Jonathjon (Jonathan Jones)]

If you have a Primo operational already you can use it to cut a set of YZ plates, and if its solid enough you can cut you some Aluminum XZ plates, or you can print a set of XZ plates as well.

You can also look at the difference in the hardware count for the primo vs LR3 and just order the rest of what’s needed, Ryan may be able to help you there or you can get it from amazon using his links in the shop.

[vicious1 (Ryan)]

@geoffjones

Wanting to convert my Primo to a LR3.

I never sold any MPCNC to LR conversion kits. You will need a handful of random stuff and linear rails, along with hardware, cut and printed parts as well.

At this point though, waiting to see if the LR4 is finally the way we want it seems like the best option.