LR2-LR3 The Longest Conversion (AUS)

Surprisingly little progress today. Well it was surprising to me, but everything is happening in its own time. Getting the table to its final location was a task in itself, but it’s there, the top is not screwed to the base yet in case it needs to be inverted for electrical inspection. All the bits are ready to assemble though.

My electrician mate is coming for lunch tomorrow so we should be good to go after he’s ticked the 240 box. The 240V stuff is in place, although I am going to shorten the length of the power pack cable to take that loop out of it. All these bits will be visible when the trussed strut turns up in the distant future

Speaking of distant future, I did get the paint scraped off then the hardboard sanded bare and a couple of seal coats of silver to get me by till then.

Today’s news is that some cupboards I ordered as a flat pack will arrive on Wednesday. No biggie, but they are the first time I’ve ever spent money on a fixture for the workshop and they’ll replace some that have served me wall, scrounged over thirty years ago, and I just couldn’t muster the energy to rebuild them. Now I’m going to have to muster the energy to fit everything in the new cupboards I guess, so that will no doubt be my delay for this week!