Another micro update on both the connector panel on the control box and a new printed mini-box to hold the THCAD2 at the location of the plasma machine.
Lots of soldering still progressing, to get all the aviation style connectors installed. I’m close to being halfway done there. After all the males are done, still have all the females to wire up and solder.
Pics current state of main connector panel:
I also designed and printed a new mini-box to hold the THCAD2 at the location of the plasma machine. I’m not sure how most folks would do this (externally like this versus inside the plasma machine), but this is how it occurred to me to do it. If this is a bad idea, someone let me know, please!
Pics of new mini-box to hold the THCAD2:
