Parts > Print Core > Attempt #1…
Done bunch of small-medium prints on my MP3DP v4, have printed test cubes, large rectangles and temp towers to calibrate. Even so, I probably should’ve tuned more before kicking off this print, but what the heck… This’ll be the first yuge print on my MP3DP, added custom Fan Duct for the occasion.
No idea whether these are good/bad settings. Initial layers are laid. We’ll see what happens…
Edit: Changes while printing (layer ~26 of ~550) :
- Dialed back speed to 80% after noticing 100mm/s infill was causing printer to shake too much and result in blobby mess. Doesn’t help that I forgot to take printer off a low profile lazy susan before printing
- Dialed back extrusion to 97% after noticing nozzle seemed to be too low and carving through material previously laid. Vaguely recall calibration test cube wall thickness was a few percent too thick, so this makes sense.