Okay, I tried to upload a gcode file, with only 3 small ones in the system. I am out of space. Uploads error out. I am doing a search by file size to try and find something suspicious.
Is there a trash can to empty or something?
RPTPRP = raptor
+10
Rv5 for short.
2 Likes
Capped by flow rate until the new CHT nozzle arrives.
1 Like
Keep Google out of this. It is an organic naming process. is there an acrynym for pterydactl?
1 Like
I’d assume you already have tons of SEO for MP3DP. I’d say just keep it as MP3DPv5. The name is sweet
1 Like
Vicious Adder v5 - Play on existing name, additive manufacturing, etc…
I tried convincing Chat GPT to play with the V1E logo, to form a Snake head as the basis for the Vicious Adder…
Me: Modify the attached logo to look like a snake head with a body curving down to form a curled shape similar to extruded filament
Me: Make the body curl like a turd, or extruded plastic. Keep these colors. Paste the original attached logo onto the head.
Me: Try making the body shaped like an ice cream emoji, but keep the snake head.
Me: chop bottom of the ice cream cone off to look like a 3D printer nozzle.
Wasn’t getting what I wanted. But generated enough examples to maybe spark idea(s) for something you like…
Vicious Adder. Wasn’t envisioning nozzle to begin with, was originally thinking something that’s a mash-up of the ice cream emoji depicting filament being extruded into a pile.
However, I like the idea of a Vicious Adder snake aggressively squeezing the crap out of the filament, so something along these lines…
Along these lines for other products you make now/future…
Vicious Adder v5
Vicious Cut
Vicious Burn
Vicious Plasma
3 Likes
Dang those are pretty good images. I am pretty shocked!
Mp3dPP
I am simple and really love the PP at the end!!!
Mp3dp plus
1 Like
Those are cool. I immediately went to “why is that snake coming out of the ice cream cone?”
1 Like
So that CHT nozzle is handling 30.8mm3/s Like 500mm test. Long enough for the extruder to dip a couple degrees and come back up and settle. This is a 0.6mm nozzle though, not a 0.5 like the carbide.
HOLY Canoli batman, that is nuuts.
I do not think I was testing the other more than 100mm. But that Carbide nozzle got me 16-18mm3/s
So I think I will set it at 27mm3/s to be safe and listen for skips. I am assuming the added pressure of a layer adds to it, but it also will never extrude that much for a very long time.
To help put it in other terms (Flow Rate Calculator – Advanced 3D Printing)
The carbide got me 0.3mm layers, 0.6 width, at 85mm/s
This CHT gets me 0.3mm layers, 0.72 width, at 125mm/s
To slow that down a bit I will go back to slightly thicker layers.
3 Likes
CHT is no joke.
3 Likes
Sorry I was on a mission to try that nozzle!! This is really close. Adder is pretty cool. Two fangs two plates. Venom, fang, strike, slither, …hmm. I think I like adder. Dude you might have nailed it.
Those images are good but can it get more simple. think recognizable from a low res emboss on a printed part.
Adder , additive, two fangs two plates. I like it.
1 Like
can we add some fangs to the V1 logo, or eyes and fangs?
2 Likes
It is kinda weird to say out loud.
Those look so much better than tumbled
My brain processed that differently… So maybe not a good name. 
2 Likes
You think so? I’m still on the fence about it. About to cut some more so we will see. I think they look better because they were cut on the LR3 instead of pu~~~ing out and using SNS LOL
5 Likes