Starting a new “LR4” build thread. Here are some of my 3D model renderings. [VIEW_01] [VIEW_04] [VIEW_03] [VIEW_02]

Awesome modeling. I love the drop table at the edge, very nice. Do you plan to extend the table when not using the drop feature? You have the long axis on X, which is generally advised against but maybe for this configuration it makes the most sense.

In practice most of the items I put on the waste board fit within the flat portion. If I ever have a full 48” wide by 24” piece it can just span over the void. As far as the long “x” axis I figure there are plenty of full 4x8 Lowriders out there that have a 4’-0” gantry and if the machine is sturdy…

I know I saw a post where someone installed an RGB LED strip below the gantry that was connected to the control board and would light up different colors depending on the run state of the machine. IE: In the ALARM state, the LED strip would be red In the HOLD state, the LED strip would be yellow …

[image] Nvizeon: I know I saw a post where someone installed an RGB LED strip below the gantry that was connected to the control board and would light up different colors depending on the run state of the machine. Most use WLED (and a separate ESP), and then they map button presses to the dif…

I believe I found it with Google AI search: [image] FluidNC LED Musings Jackpot Board / FluidNC I’ve been (and still am) resisting adding LEDs to my Lowrider. But, I keep reading things on here about them and I’m not sure how much longer I can resist. To pus…

Thanks I’m hoping to add this to the Glow Rider v4

[image] Phil Rader: I know I saw a post where someone installed an RGB LED strip below the gantry that was connected to the control board and would light up different colors depending on the run state of the machine. Yea, the crazy version of that is me. I created a WLED usermod that connect…

I’ll probably reach out to you when I get to that point in my build. My first architectural mentor (boss) had a saying that I will always remember. “You’ve got to know what you don’t know” IE: in my field of work as an architect it’s best not to “guess” when it relates to buildings that can colla…

Didn’t @Jonathjon have an easier version?

Glow Rider V4

LowRider CNC Your Builds

srcnet (srcnet) December 23, 2025, 6:27pm 9

Found the forum post - Jackpot + Wled