In my endeavors to build this MPCNC I have run into a few issues with flashing the board: First: The links on v1 engineering marlin-firmware section that say “Use this link for Archim (series) or Archim (Dual) boards (for now).” simply 404. Second: On GitHub, the “Understanding the Versions” secti…

I think we figured it out. We had to reverse a change we made about a year back. I have had two boards running all day after a few manual resets one just sitting one running gcode. Both still good. I will update github in a hour of two.

Sorry, thinkyhead just pushed a marlin archim fix so now I am updating again. The current version works with platform.io , I think the fix we made will make arduino work again. All that to say I am uploading a new version now 425…but it includes some other updates so please poke around a bit and let …

Archim Fix p.io upload issues, and Arduino IDE LCD issue. MarlinFirmware:bugfix-2.0.x ← Allted:Archim_fixes-bugfix opened 03:44PM - 04 Apr 20 UTC (UTC) [Allted] Allted …

@Crash85 Its always good to know that it wasn’t something you did wrong, or bad hardware. I was relieved when Ryan could duplicate the issue on his end. @vicious1 I will try this out today., I am hoping to have my MPCNC functional (maybe draw the crown?) this weekend!

This is why I love the forums and have to email so many people back with “please use the forums you can not possibly be the only one with this question”. I take all comments and questions seriously, even if some are a bit annoying to me, I do strive to improve and if I want to actually improve some…

Thanks for all the work and updates! Just downloaded what looks like 425D? Gonna give that a shot.

@vicious1 First upload using arduino ide didn’t work. Gave me the flash page locked error. Did the ole erase and reset, second upload worked great. Popped up with the V1 CNC Ready message. Unplugged the USB cable, so far so good. I can navigate the menus without feezing. I have noticed this thoug…

[image] Crash85: Not sure if that is an intended feature or not. Well, I did not intend for that to happen but I did notice it on my end. As far as I know that is not a setting I missed so that is a bug for another day. Thank you though I will keep that on the to-do list.

@vicious1 I am not sure if its related to this change or not, but when I compile with Platform.io my stepper motors will no longer move. They make a noise like they want to, but they don’t turn. This doesn’t seem to be the case with Arduino IDE.

I was wondering how I got lucky on this one. Cut a 611 plate a little while ago. Then I remembered I was plugged in to USB the whole time. Thanks guys! [15861288879404844069720155378334]

Flashing the Archim1?

Software / Firmware

thedevilsjester (Leto Atreides) April 7, 2020, 11:34pm 50

Success

Crashing to Blank LCD Screen on Archim Board