First CNC build (MPCNC)

[dkeller (Dusty Keller)]

Here’s a link to the Primo I built…

Holy Schnikes - It Works! MPCNC build in central Pennsylvania

[image] What an amazing feeling when you power it up and the V1 Engineering startup screen comes up! Thank you to everyone that gave me such good advice during the build process and thank you to Ryan for coming up with this concept and then making it accessible to anyone that wants to build it! Unfortunately, it appears that I may have got one of the SKR Pro 1.2 boards that ignores the end stops. If I have to I will make up some of those 1.5 ohm resistor pigtails. When I manually trip each en…

For that particular build I used all PLA. I don’t remember if I used PLA+ or PLA Silk or just plain old PLA. The only parts I had problems with was the X and Y end-stop triggers. I replaced them with small hose clamps.

My current LR4 build is where I am using PETG-CF. Here are some pics…

If I ever build another Primo I would use the same PETG-CF that I’m using on this project.