Macro help needed please. I am using Estlcam 12 and a Nano board setup as for Estlcam, not GRBL. I want to add a pair of line lasers to form a crosshair on my workpiece. The hardware I am building already for this. The crosshairs will be turned on and off using output 1. The macro I am not sure h…

Yes Dave, that works. It seems that the name is the way to add into the macro, not the output. I tested on a button on output 2 that I called LEDs and substituted the entry in the macro from output 2 to LEDs and it works fine. Testing with a LED across the signal pin and ground is pretty easy to d…

Estlcam macros

Software / Firmware EstlCAM

Nathan_Doty (Nathan Doty) February 6, 2024, 5:20pm 2