Eggbot build

[Britt (Britt Percival)]

This worked for me on a Jackpot V2.

FluidNC Eggbot

Thanks Are you using X for rotation? Here’s my Z axis for the Jackpot V2: z: steps_per_mm: 100 max_rate_mm_per_min: 5000 acceleration_mm_per_sec2: 100 max_travel_mm: 5 soft_limits: false homing: cycle: 0 allow_single_axis: true positive_direction: true mpos_mm: 0 feed_mm_per_min: 100.000000 seek_mm_per_min: 200.000000 settle_ms: 500 seek_scaler: 1.100000 feed_scaler: 1.100000 motor0: rc_servo: …