Another quick, super satisfying project! - August 19, 2023
—————————————————————————
Sheet metal scrap used in this project:
—————————————————————————
• 16 GA. (.060 thick) Hot Rolled Steel Sheet
• Bought online from Metals Depot - https://www.metalsdepot.com
—————————————————————————
Dowel rod (broom handle?) wood used in this project:
—————————————————————————
• Diameter: 26 mm
• Length: ~98 mm (or so)
• Possible source: Birch Wooden Dowel Rod | 1" Diameter x 36" Long | Pack of 2 - Amazon.com
======================
~~ PRINTABLES LINKS ~~
—————————————————————————
~ Printed Edge/Lip attached to dowel - used in this project ~
—————————————————————————
• Printables
This model is so simple that I feel sheepish uploading it, but since I published a YouTube video about the make, here it is. A printed edge/lip attached to wooden dowel rod in making filament spool holder.
NOTE: I designed the print before I sorted out which screw I would use, so I printed with enough perimeter walls to allow the center hole to be drilled out larger, which I ended up doing just that.
—————————————————————————
~ LowRider v3 DIY CNC ~
—————————————————————————
• NEW dust shoe for LR3 with NEW retainer C-clip for Vacmaster 2.5" Shop Vac hose - Printables
• LowRider 3 CNC Drag Chain Shield (protection from vac hose getting tangled underneath drag chain) v2.0.1 - Printables
• LowRider 3 CNC - printed holder for Makita Router Wrenches and Collets - Printables
• LowRider 3 plasma CNC - Drag Chain Mount revised for large 20x40 drag chain (v1.13) - Printables
• Various LowRider 3 CNC remixes -Printables
—————————————————————————
~ DIY Router Table ~
—————————————————————————
• Makita rt0700 dust extractor for 2.5 inch shop vac hose v1.0 - Printables
• Dust Collection Port (v1.0) - designed for 2.5" hose from Vacmaster shop vac - Printables
• Dust Collection Reducer Adapter 4-inch Hose to 2.5-inch Shop Vac hose v1.0 - Printables
• 2.5" shop vac hose connector/adapter, tapered end - printed replacement for a stock Vacmaster part (v1.0) - Printables
—————————————————————————
~ DIY Panel Saw ~
—————————————————————————
• [DIY Panel Saw] Z mount (v7a) - Printables
• [DIY Panel Saw] Pipe Inner Endcap Nut/Bolt Holder (M8) for .75" ID pipe - Printables
======================
~~ PRODUCT LINKS ~~
—————————————————————————
~ Consumables ~
—————————————————————————
• Heavy Duty Cleaning Towels (paper based shop rags) - Amazon.com
• Titebond Original Wood Glue, 16-Ounce, 2 Pack - https://amzn.to/44vKOQc
• Elmer’s E7050LMR Carpenter’s Wood Glue, 1 Gallon - https://amzn.to/3XX9grn
—————————————————————————
~ LowRider v3 DIY CNC ~
—————————————————————————
• Makita RT0700c Compact Router - https://amzn.to/3DlJxiH
• Inline Switch 5 PCS, Cord Appliance Switch used for LowRider v3 - https://amzn.to/43Aku6l
—————————————————————————
~ DIY Router Table ~
—————————————————————————
• Makita RT0700c Compact Router - https://amzn.to/3DlJxiH
• 48’’ Blue T-Tracks 4 PCS - https://amzn.to/3rIgjYH
• Router Table Insert Plate (235 x 120 mm) for Makita RT0700c - https://amzn.to/3K6sC7K
—————————————————————————
~Dust Collector~
—————————————————————————
• Remote Control Switches used for Dust Collector [No longer available] - Amazon.com
• Remote Control Switches used for Dust Collector [Another listing] - https://amzn.to/44z7b7w
—————————————————————————
V1 Engineering Documentation, Low Rider CNC, v3:
https://docs.v1e.com/lowrider
—————————————————————————
—————————————————————————
My PayPal tip jar: PayPal.Me
—————————————————————————
—————————————————————————
Various LowRider 3 CNC remixes:
https://www.printables.com/social/127223-doug-joseph-design8studio/collections/175217
—————————————————————————
—————————————————————————
View all my models and remixes on Printables:
https://www.printables.com/social/127223-doug-joseph-design8studio/models
—————————————————————————
*Amazon product links are affiliate links.
