Which firmware for old ramp 1.4 from old RepRap 3D priner

[kvcummins (K Cummins)]

Marlin & Ramps 1.4

OK Guy’s here’s the story. The error is as always between the keyboard and the wall. If you are using a LCD screen which is character based, you must switch on // // RepRapDiscount Smart Controller. // http://reprap.org/wiki/RepRapDiscount_Smart_Controller // // Note: Usually sold with a white PCB. // #define REPRAP_DISCOUNT_SMART_CONTROLLER In addition, you have to switch off // RepRapDiscount FULL GRAPHIC Smart Controller // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Sm…