Voron 2.4 -

[RockinRiley (Riley)]

Ryan and a few others are working on a core xy right now! I will see if I can tag it here

Building the "Repeat" printer

I tried that before, but I used to use a piezo bed levelling sensor, and it didn’t like the unsupported corner. It would probably be OK now… but I’ve figured out ways to deal with it. I did make an adapter that had 2 3mm tapped holes 209mm apart and one 3mm stud in the center. That works OK with the PCB heated beds. The aluminum ones seem to be stiff enough. For this printer, because the bed mount isn’t actually for levelling, I’ll use spacers to keep a silicone pad underneath, and then firmly…

Also known as mp3dp repeat. They are making with extrusion, or wood frame. Pretty exciting.

MP3DP "Repeat" Build

Hey everyone, I could not pass the opportunity to build another amazing Machine Designed by @vicious1 V1 Engineering and Beta test it, if you will. Took me a little while to free up some time from work to be able to start on this, almost 3 weeks to be exact. Finally, this past week I had some time off and nothing work related to print on my 3D Printer. As usual I did not take enough pictures of the printed parts or the Lowrider cutting the wood frame, but I’m trying to be better at it and th…

Sorry if you only want info on voron.