Videos of LR3's?

[gpagnozzi (GP)]

Here is another one

GP - LR3 Beta Build

Well I screw up more than once today, was able to cut 2 out of the 3 struts… Cut a piece of plywood 300x1450 and let’s get the machine dirty!!! I didn’t check the router bit, as it was used to cut the YZ plates and I had no burns or any other issue, looks like it was the best Bit, so start the cut and this happens… [IMG_1548] Then I Realize that I was also going a little too fast, well the same speed I cut the YZ plates 20mm/s. Changed the end mill, drop the speed to 12mm/s and got 2 struts…