Updated Marlin post processor for Carveco Maker

Software / Firmware General
1

marlinCC.zip (1.1 KB)
I have attached an updated Marlin post processor for Carveco Maker.
I have corrected the issue which caused G2/G3 to generate errors (I and J formatting) and the Z rapid feed rate error.

If anyone finds any further errors, please let me know (along with the generated g-code) and I’ll take a look

2

Is this still up to date?

Any limits on the Marlin version or other factors?

I’m considering trying Maker to take advantage of their new “image to relief” tools.

3

It should be. I don’t use marlin any more, now that I’ve changed my Lowrider to a Jackpot controller.

4

Thanks for the quick reply.

Do you use the Carveco Maker product with your Jackpot? Any surprises?

5

3gn5us
3gn5us612×408 52 KB

1 Like
6

No surprise. Carveco has a GRBL post processor as standard.

I’ve tried using Fusion360, but found the learning curve is too steep. Everything in Carveco is intuitive, and there are loads of tutorials on Youtube. In particular, tutorials from James Dean Designs https://www.youtube.com/@JamesDeanDesigns/videos

1 Like