Unknown problem with Fusion Gcode or Ramps

Mostly Printed CNC - MPCNC Troubleshooting
21

Tentatively calling it fixed, was quite an emotional roller coaster

Win 10 didn’t want to let me upload the image, bit of googling eventually fixed that - everything back in the machine, one Y axis motor dead, stepper driver ok, cable and motor ok but socket dead?

No spare board, cried a little inside, went to go and find the screen for the SKR board in my box of misc control boards and stepper drivers and what do i find, a Ramps 1.6 board I don’t even remember buying, faith in humanity restored, mpcnc looks like its running again on my quick test.

Also that new UI is much slicker, I really should try and keep up to date with firmware.

I guess we’ll never know if it was the board or the software, but thanks for sticking with it, you help was much appreciated.

22

Glad it is working?

So the ramps board, after getting pulled and put back, the Y driver was bad?

23

No weirdly the actual socket was dead, all the stepper drivers were fine, all the others worked fine, but that one refused to work, also I lied, It was the proper X axis one nearest the power input, not Y like I claimed earlier.

1 Like