Teeny tiny engraving

[Tokoloshe (Philipp)]

I am using a different board and controller, but there should be some threads with the right commands around.

@jeffeb3

Setting the origin, setting the 0,0,0, is different (homing does set the origin, but it sets it where you don’t want it). Ryan’s test crown has a G92 X0 Y0 Z0 at the top. Wherever the tool is when you start that gcode will be set to 0,0,0. But that gcode doesn’t include homing, and you need to add that to your gcode if you want it to automatically set the origin.

It seems G92 X0 Y0 Z0 seems to be your solution. You can include starting gcode in Estlcam so it always adds that to your programs.