I got this all from the V1E store last April. It served me without any issues but then I ran into what may or may not be the infamous Z pullup resistor issue. I tried a ton of things to fix and diagnose, including soldering a 1.5k resistor between pins 1 and 3 of the PG8 plug. Nothing worked. I ended up getting a Jackpot and have been OK with it so far. I don’t see myself doing anything in the future that would require another controller, so it’s up for sale.
You get the SKR Pro 1.2, five TMC2209 drivers already installed, the display, and its stock cables. I wrapped some paraffin tape around the Dunlop plug for the board side of the display to help it stay plugged in. It’s in a 3D printed box case which can mount to a metal strip if you want, or just stay loose.
I flashed it with stock firmware. Other than the aforementioned pullup resistor issue on EG8, it’s got no issues. If you know what you’re doing and have more will to do something with it than I do, you might have a bargain on your hands for your MPCNC. If not, I’m sure it’ll do great with other projects.
If I can find the programming interface for the ESP01S board, I’ll wipe my config from it and include it. Otherwise, I’m keeping it for security purposes since I think it has my wifi password in cleartext.
What you see is what you get. Asking $95 shipped and insured to the lower 48 states, a little more for the rest of the world. Not looking for any trades unless you have a Jaguar style electric guitar (or car) lying around that you’d want to trade.
