Primo MPCNC For Sale (Kent, UK)

I finished building my primo in May 2021. I documented the whole process here: New Primo Build (UK)

It has been lightly used. A short while after I finished buliding it I gained access to larger tools and a laser cutter. Since then it has been stored away and occasionaly used now and again. More recently though, not so much.

It has the spindle and a laser engraver. Both of which are included.
I have wired it so that the laser can simply be removed with the custom mount. And the spindle has connector wires at the top which make it modular to plug in and out with the included mount too. (See pictures to see what I mean).
I’ve included a short video of it homing to show it working with the end stops.

It is in Kent, UK, and will need collection. It comes built onto the base, and I have added legs to it too to make it a standalone table unit. The legs can be removed for transport though.

Working area is X:600mm, Y:400mm, Z:100mm.

  • All the MPCNC 3D printed parts, including a 3D printed housing for the screen and electronics
  • Drag chains, mounts, and all cables tidys
  • BIGTREETECH SKR Pro V1.2 control board with 5 TMC2209 V1.2 drivers
  • BIGTREETECH TFT35 V3.0 control screen
  • 5 x Nema 17 Stepper Motor Bipolar 2.0A (59Ncm)
  • 4 end stops (Dual end stop firmware is installed on the SKR Pro V1.2)
  • All PSU and buck converters
  • Yofuly CNC Brushless Spindle Motor Kit
  • All the wiring, including stepper motor leads with the correct connectors on the control board end.
  • All accesories including touch sensor, spoil board (I can include a spare spoilboard too), collets, various colelction of router bits, etc

This is a complete build and set that you can simply plug in and start using straight away.
I haven’t got a picture of all the accessories, but they are included in the sale.
Happy to demonstrate it all fully working to buyer on collection of course.

I lost track of the total spend on this, but it was a lot haha!
I am asking £500 for everything.

Please do ask any questions, and viewings are also welcome if you’re nearby.

Homing Video

1 Like

If it makes it easier for someone, I could be willing to deliver it myself to somewhere in the UK.
Please contact me to discuss this if you’d be interested.

Thanks :slight_smile:

Now sold.

1 Like