LR3 control box case for SKR Pro 1.2 with TFT35 E3 — based on V1’s Blank Case CAD files
FREE STL FILES AVAILABLE HERE: Printables
I’ve remixed the excellent “blank case control box” model provided by Ryan, to support SKR Pro 1.2 with TFT35 E3 and with two cooling fans. It also has openings for accessing the main board’s USB slots and SD card slot, and an opening for accessing the touchscreen’s SD card slot.
The two fans used are these Noctua 40x10’s.
I’m currently printing it, and it’s a pretty big print run, so hopefully it will come out as desired and not need redoing.
Below is a screen shot and the model parts with print times, which are based on .3 layer height and .6 wall width. I’m accomplishing that print spec with both 0.4 nozzles and 0.6 nozzles.
| Part | Print time | Grams of Filament |
|---|---|---|
| Base | 11h 34m | 182g |
| Lid | 6h 20m | 106g |
| TFT Holder | 4h 21m | 73g |
| Reset Button | 0h 4m | 1g |
UPDATE (2022-06-06): I switched the orientation of the touchscreen. The following are updated screen shots.
