Next Zenxy build ideas

[jeffeb3]

Oof, it is pretty old:

GRBL_ESP32 continued

Here is the diff on my config.h: [scode] git diff Grbl_Esp32/config.h diff --git a/Grbl_Esp32/config.h b/Grbl_Esp32/config.h index 35a3ebb…57dc427 100644 — a/Grbl_Esp32/config.h +++ b/Grbl_Esp32/config.h @@ -169,9 +169,8 @@ Some features should not be changed. See notes below. // will not be affected by pin sharing. // NOTE: Defaults are set for a traditional 3-axis CNC machine. Z-axis first to clear, followed by X & Y. -#define HOMING_CYCLE_0 (1<<Z_AXIS) // TYPICALLY REQUIRED: Fir…

I didn’t change anything for mine. I should probably try to configure the new one before recommending it to someone else.