update just added a Z touch plate using the BL Touch pin P0_10 with Jeffeb3’s help!
ok in config.H I did this :
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#define Z_MIN_PROBE_PIN P0_10
#define FIX_MOUNTED_PROBE
and in configadv.H I did this
#define G38_PROBE_TARGET
Heres the link to the post I made originally
https://forum.v1e.com/t/skr-v1-4-turbo-dual-endstops-and-adding-a-z-touch-plate/19066?u=crash13
Hope this helps others .
cheers .
Crash13
Rob h.