Nameplate for a Horse

Nothing more to say. Horses have stupid clichée names… :smiley:

Pro tip: Don’t try to rush it by using 75% stepover for the cleaning path… :smiley: Cleanup by hand takes longer…

Side remark: No problems with losing X at all with 2000mm/min for the 6mm 2-flute endmill with 3mm DOC, 1000mm/min for the 60° engraving endmill. It was really just the deceleration.


@vicious1 It’s a Lowrider, duh! Thanks for adding the tag, keep on forgetting… :smiley:

1 Like