Hey everyone, I could not pass the opportunity to build another amazing Machine Designed by @vicious1 V1 Engineering and Beta test it, if you will. Took me a little while to free up some time from work to be able to start on this, almost 3 weeks to be exact. Finally, this past week I had some tim…

Yes it did, but still, no joy trying to Auto Z-align or even Bed Level.

Problem solved!!! Replace the board and everything is working! I can’t beliave it, that board was brand new, it was just seating in the shelf unopened for about 3 months. [IMG_0830] [IMG_0829]

An m48 worked, but neither M29 or 34 did. I can’t believe that is somehow board related, what the heck?!

I decided to replace the board after reading on Reprap forum where a guys had the same problem with the Octopus Board

If the firmware can see TRIGGERED, then I have no idea how this could be hardware related. That’s what bugs me.

MP3DP "Repeat" Build

Mostly Printed 3D Printer - MP3DP Your Builds

gpagnozzi (GP) November 15, 2021, 7:17am 37

Right, the board has no noticeable damage, nothing burnt that I can see…

NEJE Laser to be used with RAMBo 1.4a and Estlcam