Mike's MP3DP v5 build

So just a little update. Printer has been working great. Still have not finished the back panel enclosure or found a permanent home for it yet.

Since last posting I have changed my nozzle out to a 0.4mm CHT nozzle running on the H2 V2S Lite.

I had no problem flowing PLA at 220ºC at 25mm3/s through it.

I also have started playing with some other filaments.

I had not ever printed ASA or TPU before, and have now printed both successfully.

Here’s the first ASA prints I had come off the printer:





7 Likes