Hi!
Just opening a thread to keep my questions central. I am sure i will ask a lot.
I have no experience whatsoever in cnc or the proces to create a file.
For now i have printed all the parts in PETG-CF and have almost all the other parts complete.
It will just be for a quarter sheet just for learning
Just start building en get going. Succes er mee, tijd voor een NL ledendag
Welkom! Nice to have another lowrider cnc in the Netherlands, I think we are with 5 or 6 now
Welcome, perhaps a reason for a Dutch subforum?
Today i started with some assembly.
I really like those cable-channels, super engineering!
But i had a little problem with the mounting of the back rollers. This nut spins around in its pocket, and with that nylock i can never get it off again. i want it secure tightened so i’ll cut the part off tomorrow.
Maybe my PETG-CF is a little softer as PLA on a small surface.
On the other side i glued the nut secure before assembly
More people this problem?
You can push a screwdriver in the slot to stop the nut from rotating and then unscrew it. I would then just glue the nut in.
This is the second one, i glued that one. But the first one is already mounted, so the spinning nut is not accessible anymore for a screwdriver
Gorgeous machine!
Question!
According to the manual we label the steppers on the left X0 and Y0. The right X1 and Y1, and one Z stepper.
I have a SKR pro board(with wrong drivers, waiting for new ones)
We have to wire the SKR like on this screenshot.
I don’t get the labels in this, what is the labeling that fits the manual.