LowRider Z Leveling Math

[jeyeager (Jason Yeager)]

Ryan made some updates. I changed the G0s to G1s but haven’t tried it or posted it yet.

GCode Variables and Loops

Okay this one works, I had to add a X and Z home in the middle to get it right. To speed it up I set it to rapid down 80% for each probe so we could do a slower probe. (PRINT, LowRider Z Leveling for FluidNC v3.9.1 or higher) (UPDATE REQUIRED) #<probeYPos> = 55 (Y position to probe at dependent upon condition of spoilboard) #<probeXLeftPos> = 5 (Left X position to probe at dependent upon condition of spoilboard) #<probeXRightPos> = 635 (Right X position to probe at, should be close to max X) #<…