Lowrider 4 tubes

[Dreyfus]

Thanks. I cut my plates on my LR3 before I stripped it.

Not perfect but it was only the second thing I did in aluminium and they work fine

LR4 XZ plates

[image] It’s not good. On the other hand the whole job was done, holes and all, with a 15mm long cheapo 1/8” coated single flute bit - of which I bought 10 And I got my money out of my 10bux of 10mm plate [image] I also did a partial print of an end strut to confirm the hole pattern lines up - which was fine.