I sort of assembled it. I needed a 1.6mm spacer for the resetbutton to work (without spacer it is pushedcontinuously)
The menu knob is a bit offcentre (margin left 3.5 mm, right 7mm up 4mm, down 6mm, so ideally it should be placed 3.5 mm to the right and 1 mm down)
The red spacer on the left is 1.6 mm. 1.8 is too large, gap between screen and lid, 1.2 mm and the reset button gets stuck. I think it is best to make the resetbutton a bit longer and deeper.
Menuknob fits and can be turned and pushed
It looks like the usb port is missing on the pcb
Oh no! It’s not missing, its at the wrong place
Many thanks for helping me out! I like the collaboration and the support!