LinuxCNC (EMC2) Post Processor for Fusion 360 — for use with milling, NOT for plasma cutting
The download source for this is: Post Library for Autodesk Fusion 360 | Autodesk Fusion 360
Search for: “LinuxCNC” or “LinuxCNC (EMC2)”
Current results (as of Nov 25, 2022):
LinuxCNC (EMC2)
Download / Sample / Share / RSS
- Purpose: Milling
- Version: 43918
- Minimum post engine version: 45702
- Changed: 100 days ago
- Extension: ngc
- Downloads: 261
- Generic milling post for LinuxCNC (EMC2).
Previous versions are listed on their site.