Just a simple (~1 hour from sitting down at the computer to part in hand) kickoff project for the LR4. Scrap plywood, didn’t even clean it up/ sand yet. Awesome! Was using the pendant to dial in the speed, but was around 25mm/s, 5mm doc, 3 on the Kobalt dial, 3/16" two flute bit. May not be optimal feed/speed (climb milling) but I still got the best plywood cutting results I’ve ever had–and this is hard-ass old oak plywood!
Big improvement over my good ol’ LR2 and LR3. Pleasing!