Can you link to where you found your firnware? I’m not finding it.
Here.
That comment says that one version homes to the back, that might put it at Y=2000. So that solves that part of the mystery.
yes, sir. I kinda figured that to be correct.
Ok so i was able to bring Micheal s (TT) marlin file into platformio. I went ahead and built it just as he explains too in his video. But i’m getting a failed "LPC1768. any clue as to why? I’ll get to doing some research but its been one hell of a long weekend.
at90usb1286_cdc IGNORED
at90usb1286_dfu IGNORED
DUE IGNORED
DUE_USB IGNORED
DUE_debug IGNORED
LPC1768 FAILED 00:00:01.572
LPC1769 IGNORED
melzi IGNORED
melzi_optiboot IGNORED
rambo IGNORED
sanguino_atmega644p IGNORED
sanguino_atmega1284p IGNORED
STM32F1 IGNORED
STM32F4 IGNORED
ARMED IGNORED
mks_robin IGNORED
black_stm32f407ve IGNORED
teensy35 IGNORED
malyanm200 IGNORED
esp32 IGNORED
fysetc_f6_13 IGNORED
linux_native IGNORED
==================== 1 failed, 0 succeeded in 00:00:01.572 ====================
This sure doesnt seem correct.
There is a more helpful error message higher up. Start with the first error.
I removed the .pioenvs like it said, Now its telling me unable to find destination disk (’+e +’)
I just want to save it to the file location I entered when i started the project. But… thats not happening.
I’m assuming the motherboard is incorrect and thus the reason why my skr isnt responding like it should
Or am I wrong here?
- :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/
#define BAUDRATE 250000
// Enable the Bluetooth serial interface on AT90USB devices
//#define BLUETOOTH
// The following define selects which electronics board you have.
// Please choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD
#define MOTHERBOARD BOARD_RAMPS_14_EFB
#endif
// Optional custom name for your RepStrap or other custom machine
// Displayed in the LCD “Ready” message
//#define CUSTOM_MACHINE_NAME “3D Printer”
// Define this to set a unique identifier for this printer, (Used by some
Motherboard is definitely not Ramps_14. Change it to BOARD_BIGTREE_SKR_V1_3
I have fixed everything that I can possibly think of, stepper motors, board, stepper drivers, HOME_BUMPs are set to where I like them. extruder temp set to 170… (found this in another post) endstops enabled. But now I get this message and its driving me crazy and of course I am unable to find anything about it
File “C:\Users\Chris\Downloads\mpcnc lowrider 2 - marlin 2.0 and mks tft firmware\marlin 2.0 - mpcnc lowrider2 - skr v1.3 tmc5160\Marlin\src\HAL\HAL_LPC1768\upload_extra_script.py”, line 16
print '\nUnable to find destination disk (' + e + ')\n' \
^
SyntaxError: invalid syntax
Guys for the love of god, what am I doing wrong here? I’m pulling my hair out here.
Directory name is too long. Move the Marlin folder to C:\ or another root directory. Or just shorten both MPCNC directories a lot.
Care to explain how to do that, Edward?
navigate to your Downloads directory. Right click on the folder labeled "mpcnc … " and rename it to mpcnc. open it and do the same to "marlin 2.0… " to marlin2.
This looks like you’re trying to upload it from platformio. Just build it, get the firmware.bin, and put the .bin on the sd card.
I don’t think platformio has a problem with huge names.
I’ve changed it and still get
File “C:\Users\Chris\Desktop\Marlin2\marlin 2.0 - mpcnc lowrider2 - skr v1.3 tmc5160\Marlin\src\HAL\HAL_LPC1768\upload_extra_script.py”, line 16
print '\nUnable to find destination disk (' + e + ')\n' \tried just building it and I still get the same syntax error
Some details here on that error: https://community.platformio.org/t/error-uploding-marlin-onto-lpc1768-skr-1-3-board/9752
From there: “Marlin uses the script Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py to locate the operating system drive that is the LPC1768 based SD card. For it to find the correct drive It looks for one of two things. A file called FIRMWARE.CUR in the root of the file system or a volume name of “REARM” If it find either of these it uses that drive.”