Yes it was from elecrow. I don’t think the issue is with the jackpot board itself. I did some cutting today with it after it finally connected. Cut very well and no issues except for the freezing of one of the jobs and during jogging.
Drivers are the original ones Ryan shipped with the skr boards.
I do have to say I am very very impressed with the results from the lr4. What an upgrade over the lr3. Used to be cutting 6mm doc 6mm bit at 12mm/s in plywood. Got excellent results today with my lr4 at 50mm/s!
Edit: ended up ordering these atoom 32d https://amzn.eu/d/47pGuHw
Could not find a 32e anywhere in Europe with 38 pin. Also almost all boards for sale are wroom 32 and not the 32d version. Lets see if these boards work and fix my issues.
Installed fluidnc 3.9.1 and webui v2 on the Newley ordered esp32 today. Connecting was very fast and everything responded quicker. No freezes or other issues so far, but I have yet to run a long job on it. But the issue seems to have been the esp32.
So to conclude. If you can, save yourself the trouble and order from @vicious1 directly.
If you live in the eu like me and order from elecrow. Make sure to source well rated and trusted esp32’s