Hello,
at the moment I am building a MPCNC (currently printing parts).
Would those stainless tubes be the right thing (in german, stainless handrail, 25x2mm):
link
Thanks
Daniel
Yes these are the right ones, check out Hörr Edelstahl maybe you get there a better Price i paid for all the Rails for a 600x600x105 MPCNC 102€ with shipping
regards,
Martin
That’s a great tip Martin!
I was looking around for the tubes in the Netherlands but here stainless steel would cost me over 200 euro for a 720x630 build and around 70 euro for normal steel 2mm wall thickness.
At Hörr this is going to cost me 120 euro for stainless steel 2mm wall thickness including shipping to the Netherlands. Also the hardware is a lot cheaper and can be ordered from the same company.
I used chromed wardrobe bar found at Leroy Merlin(if it exists in your country), it costed me 8€ for 1m 1.5mm thickness bar so less than 60€ for an 600x600 primo
I bought some 25mm steel pipes at Bauhaus for about 2 Euro per meter so cost me about 16 Euro for my 1000*500 build with some to spare.
1 Like