25mm primo core clamp issues

[vicious1 (Ryan)]

Please run both tests.

Printer tests and calibration

There seems to be a lot of print issues these days. I am going to try and find some suitable tests to help prevent a lot of wasted time and plastic. 1-XY axis distance and square. You are looking for 150mm on each side and equal diagonal dimensions. Possible issues, Measure near the top of the print so you are not dealing with elephants foot. https://www.prusaprinters.org/prints/36412-xy-size-and-square-calibration-print [150 XY Test] If the outer print is not 150mm - <0.6mm+/- loose (or…