Printed parts looking for a good home… Domestic us shipping is free. International shipping is not included. Help me keep these parts working.
Local pickup in Minnesota an option and conduit possible if the sizing suits your build. I pulled all the bolts thinking it was going to be melted down, but we could repopulate the core and the legs. It will be 14 bearings short and missing most idlers and ~40 m5s.
Printed parts only (and z axis tubes and leg tubes as well as optional printed cable chain shown in photos below). Parts were printed earlier this year and have been used, but not abused. System was functional when retired. The electrical guts are in an LR4. I can potentially part with some bearings and some bolts, z nut, coupler, and lead screw. The tool mount is a first gen cobalt that may actually be the first one. Makita mounts also included if desired.
Originally built this primo as my first v1 project. It was red and silver but too big.
I cut it down and ran it hard breaking a lot of parts, so this year it got new better printed parts off the mp3dp v4. It ran some but not nearly as much as last year. I built a beta lowrider 4 and need a place to put it and a friend wants to build a lowrider4.
If no word on this by Christmas, I may have a new flat piece of colored plastic to mill on the LR4.